How LED Boat Lights Stack Up Against Halogen Boat Lights

How LED Boat Lights Stack Up Against Halogen Boat Lights


The big news in boat lights these days is the introduction of high performance solid state lighting, otherwise known as LEDs. Although they are proving quite effective in real world examples and the number of boaters making the switch to LEDs grows every day, there remains a large group skeptical of their value and effectiveness.

Halogen Boat Lights

Halogen boat lights have been the dominating form of boat lighting for many years. Fairly cheap to purchase and to produce a good amount of light for the money, they have been an effective addition to most boats. Halogen lamps, however, have had several drawbacks that simply cannot be overcome by any improvements, largely because of the constraints produced by their basic design. Halogen lights produce a lot of heat. These bulbs are designed to produce more light than their standard incandescent counterparts, and one of the side effects of producing more light is higher heat production. While a halogen bulb may have the same wattage rating as its incandescent counterpart, it produces more heat because of the filament and bulb design as well as the materials used to construct it. It’s brighter because it causes the filament to run hotter than a standard incandescent. This high heat has led to problems with overheating, fire hazards, and accidental burns.

Halogen boat lights tend to have a rather short operating life. Most halogen lamps tend to have shorter lifespans the higher the wattage is, and averages around 500 to 1,000 hours are common. Depending on how often you use them, you can expect to replace them fairly often, sometimes within as little as a season of use. The durability of halogen bulbs leaves a lot to be desired. Because they are at the basic level a simple incandescent bulb, they too have a thin wire filament and fragile glass bulb used in their construction. This means that the bulb is sensitive to rough handling, and a halogen bulb exposed to frequent vibration can experience premature failure due to the wire filament becoming fatigued and breaking.

LED Boat Lights

LED boat lights although not perfect have at this time pretty well solved the majority of issues associated with standard incandescent boat lighting. Costing more than halogen lamps, the initial cost of LEDs continues to drive some potential buyers away, but a look at the benefits reveals how this initial cost is, in reality, deceptive, and how LEDs can be more cost effective in the long run.

LEDs are a solid state form of lighting that does not rely on a wire filament or glass bulb to produce light. Rather than heating a filament to cause it to glow and emit light, and LED passes current through a piece of semi-conducting material, which in turn causes the material to radiate photons, or as they are more commonly known, visible light. This process does produce some heat, but very little, and since it is so efficient little energy is wasted as heat and is instead radiated as light energy. In other words, and LED fixture will not present a burn or fire hazard due to its operating heat, making it an ideal candidate for installation into cabins as overhead lighting.


There are still more benefits associated with LEDs when comparing them to standard types of boat lights such as halogen. To cover them all would be a lengthy process. Suffice it to say, as the price of LEDs continues to drop and the performance of LEDs continues to be improved, the chances are very good that shortly, when we talk about standard boat lights, we will, in fact, be referring to LEDs and not the old halogen standby. Click here for more information: