LED lights for boats: During the winter months, particularly in areas where snow and freezing temperatures are commonplace, most boaters leave the craft covered and trailered until the warmer months.
With the coming of April and spring, however, thoughts begin turning towards preparing for the coming boating season, and as well as performing the general freshening and basic maintenance needed to prepare for putting to water, early spring represents a great time to perform upgrades as well.
Check your equipment and stuff must be a consideration
One area where almost any boat can benefit from upgrades and improvements is found with the lighting systems. Unless your craft is a newer model outfitted with the latest in high-efficiency marine lighting, the chances are very good that your current systems provide adequate performance at best, and operate far less efficiently that they could.
Most boats manufactured before 2010 are outfitted with traditional incandescent lamps.
Boat lightsEnergy efficiency
Energy efficiency, in particular, is a major area of concern for boaters, and many simply don’t realise just how much power they are losing when running their lights. Lightings onboard and the various wattages and amperage draw of each. Once this is done, it becomes far easier to not only get a better idea of just how much overall power is required to run your current lighting but how much power you save after an upgrade.
LED boat lights performance
Today is led lights for boats offer performance regarding output, light quality, versatility, durability, longevity, and efficiency that not incandescent bulb can match. For some comparisons, consider the following facts:
- Incandescent Bulb Life = 500 to 1500 hours
- LED Lamp Life= 30,000 to 100,000 hours
- Incandescent Light Output Per Watt= 15 to 17 Lumens per Watt
- LED Light Output Per Watt= 60-100 Lumens Per Watt
- Incandescent Light Quality= Color Temperature Approximately 2700 Kelvin to 3300 Kelvin (Slightly Yellowish/Red Light Coloration)
- LED Light Quality= LEDs Can Be Designed to Produce Light with Colour Temperatures Ranging from 3000 Kelvin to Over 8000 Kelvin (Warm White to Cool White Depending Upon User Preference)
- Incandescent Efficiency= Up to 90% of Consumed Energy Wasted as Radiant Heat
- LED Efficiency= Over 80% More Efficient Than the Incandescent Bulb
- Incandescent Durability = Poor. Glass Bulb is Fragile, Wire Filament is Prone to Damage and Breakage from Vibration and Rough Handling
- LED Durability= Excellent. No Glass, Solid State Construction, No Filament, Almost Impervious to Vibration and Mild Impacts
When we also factor in the longevity and durability of led lights for boats, was also see that more savings can be realised in reduced maintenance and far fewer bulb replacements. Since a LED will last for several years compared to the season or two of an incandescent, the chances are good that you may not need to replace a bulb again for the entire time you own the boat.
With fewer lamp breakages and burnouts from rough conditions as well, unexpected replacement costs also drop. What this means is that even though led lights for boats do cost more to purchase initially, over the life of the fixture, it becomes more cost effective as its operational life is far longer.
Overall, the benefits of upgrading to LEDs onboard you boat simply makes too much sense to ignore. If you’ve been considering installing marine led lights, now is probably the right time. With the boat out of the water and more conveniently accessed, it only makes sense not only to freshen thingsup but make improvements that will save money and add increased enjoyment as well.
Check out this link for more informations: http://learn.eartheasy.com/2011/08/led-bulbs-are-ready-to-light-your-home-7-tips-you-should-know/